%matplotlib inline
import matplotlib
matplotlib.rcParams['image.cmap'] = 'gray'
matplotlib.rcParams['image.interpolation'] = 'nearest'
RANSAC¶
From WikiPedia:
Random sample consensus (RANSAC) is an iterative method to estimate parameters of a mathematical model from a set of observed data which contains outliers. Therefore, it also can be interpreted as an outlier detection method.
import numpy as np
from matplotlib import pyplot as plt
from skimage.measure import ransac, LineModelND
Let’s set up some random data points:
np.random.seed(seed=1)
# generate coordinates of line
x = np.arange(-200, 200)
y = 0.2 * x + 20
data = np.column_stack([x, y])
# add faulty data
faulty = np.array(30 * [(180., -100)])
faulty += 5 * np.random.normal(size=faulty.shape)
data[:faulty.shape[0]] = faulty
# add gaussian noise to coordinates
noise = np.random.normal(size=data.shape)
data += 0.5 * noise
data[::2] += 5 * noise[::2]
data[::4] += 20 * noise[::4]
plt.plot(data[:, 0], data[:, 1], '.');

Now, fit a line to the data. We start with our model:
$$\mathbf{y} = m \mathbf{x} + c$$
Or, in matrix notation:
$$\mathbf{y} = \left[ \begin{array}{c} \vdots \ \mathbf{x} \ \vdots \end{array} \ \begin{array}{c} \vdots \ \mathbf{1} \ \vdots \end{array} \right] \left[ \begin{array}{c} m \ c \end{array} \right] = X \mathbf{p}$$
TODO: the above is not rendered correctly. p is column vector.
Since we have an over-determined system, we use least squares to solve:
x = data[:, 0]
y = data[:, 1]
X = np.column_stack((x, np.ones_like(x)))
p, _, _, _ = np.linalg.lstsq(X, y)
p
array([ 0.04829453, 12.45526055])
With those parameters in hand, let’s plot the resulting line:
m, c = p
plt.plot(x, y, 'b.')
xx = np.arange(-250, 250)
plt.plot(xx, m * xx + c, 'r-');

Scikit-image provides an N-dimensional LineModel object that encapsulates the above:
model = LineModelND()
model.estimate(data)
model.params
(array([ 27.3093349 , 13.77415203]), array([-0.99847184, -0.05526279]))
Instead of m and c, it parameterizes the line by origin
and direction — much safer when dealing with vertical lines,
e.g.!
origin, direction = model.params
plt.plot(x, y, 'b.')
plt.plot(xx, model.predict_y(xx), 'r-');

Now, we robustly fit the line using inlier data selecte with the RANSAC algorithm:
model_robust, inliers = ransac(data, LineModelND, min_samples=2,
residual_threshold=10, max_trials=1000)
outliers = (inliers == False)
yy = model_robust.predict_y(xx)
fig, ax = plt.subplots()
ax.plot(data[inliers, 0], data[inliers, 1], '.b', alpha=0.6, label='Inlier data')
ax.plot(data[outliers, 0], data[outliers, 1], '.r', alpha=0.6, label='Outlier data')
ax.plot(xx, yy, '-b', label='Robust line model')
plt.legend(loc='lower left')
plt.show()

Going interplanetary¶
The sun is one of the most spherical objects in our solar system. According to an article in Scientific American:
Earth’s closest star is one of the roundest objects humans have measured. If you shrank the sun down to beach ball size, the difference between its north-south and the east-west diameters would be thinner than the width of a human hair, says Jeffery Kuhn, a physicist and solar researcher at the University of Hawaii at Manoa. “Not only is it very round, but it’s too round,” he adds. The sun is more spherical and more invariable than theories predict.
If the sun is spherical, we should be able to fit a circle to a 2D slice of it! Let’s load an example image:
from skimage import io
image = io.imread('../../images/superprom_prev.jpg')
f, ax = plt.subplots(figsize=(8, 8))
ax.imshow(image);

In this specific image, we got a bit more than we bargained for in the form of magnificently large solar flares. Let’s see if some canny edge detection will help isolate the sun’s boundaries.
from skimage import feature, color
f, ax = plt.subplots(figsize=(10, 10))
edges = feature.canny(color.rgb2gray(image), sigma=2)
ax.imshow(edges, cmap='gray')
<matplotlib.image.AxesImage at 0x7fcf29538e48>

The edges look good, but there’s a lot going on inside the sun. We use RANSAC to fit a robust circle model.
from skimage.measure import CircleModel
points = np.array(np.nonzero(edges)).T
model_robust, inliers = ransac(points, CircleModel, min_samples=3,
residual_threshold=2, max_trials=1000)
The parameters of the circle are center x, y and radius:
model_robust.params
array([ 287.07798476, 306.07014353, 225.70127981])
Let’s visualize the results, drawing a circle on the sun, and also highlighting inlier vs outlier edge pixels:
from skimage import draw
cy, cx, r = model_robust.params
f, (ax0, ax1) = plt.subplots(1, 2, figsize=(15, 8))
ax0.imshow(image)
ax1.imshow(image)
ax1.plot(points[inliers, 1], points[inliers, 0], 'b.', markersize=1)
ax1.plot(points[~inliers, 1], points[~inliers, 0], 'g.', markersize=1)
ax1.axis('image')
circle = plt.Circle((cx, cy), radius=r, facecolor='none', linewidth=2)
ax0.add_patch(circle);

The circular fit is, indeed, excellent, and rejects all the inner squiggly edges generated by solar turbulence!
Note a general principle here: algorithms that aggregate across an entire path are often robust against noise. Here, we have high uncertainty in the solar edge, but also know that only the solar edge pixels contribute coherently to the full circular path around the solar edge.
Exercises¶
Your small start-up, CardShark, run from your garage over nights and evenings, takes photos of credit cards and turns them into machine readable information.
The first step is to identify where in a photo the credit card is located.
- Load the photo
../../images/credit_card.jpg - Using RANSAC and LineModelND shown above, find the first most prominent edge of the card
- Remove the datapoints belonging to the most prominent edge, and repeat the process to find the second, third, and fourth
f, ax = plt.subplots()
image = io.imread('../../images/credit_card.jpg')
ax.imshow(image);

Warning: SPOILER ALERT. Solution follows!¶
f, ax = plt.subplots(figsize=(10, 10))
edges = feature.canny(color.rgb2gray(image), sigma=3)
edge_pts = np.array(np.nonzero(edges), dtype=float).T
edge_pts_xy = edge_pts[:, ::-1]
for i in range(4):
model_robust, inliers = ransac(edge_pts_xy, LineModelND, min_samples=2,
residual_threshold=1, max_trials=1000)
x = np.arange(800)
plt.plot(x, model_robust.predict_y(x))
edge_pts_xy = edge_pts_xy[~inliers]
plt.imshow(edges);
